Model One BT


Hissing/Humming Sound, Drifting off a Station, Interference:

If you are experiencing a hissing or humming noise, your radio drifts off of a station while listening, or you are hearing a lot of interference, try exercising the tuning dial. To do this, please follow the instructions below:

  1. Turn the radio ON to the FM position
  2. Turn the volume down
  3. Slowly turn the tuning dial from one end of the frequency range to the other (from 88.0 to 108.0 FM frequencies) and back again, making sure you sweep all the stations in between. Repeat the process for 3 to 5 minutes.
  4. Tune in a station and see if it is working better

Excessive Bass:

If you are experiencing too much bass, try repositioning the radio further away from walls or corners. You can also try placing a small amount of sound-absorptive material such as tissue paper or cotton balls into the bass port in the bottom of the unit.

Poor AM Reception:

If you are experiencing poor reception, you can purchase our AM External Antenna or a TERK AM Advantage Antenna.

You can also try changing the position of your radio or moving it to a different room to see if the reception improves.

Grease (clear substance) leaking out of the tuning dial:

This liquid grease helps the tuner move fluidly when changing stations. It is normal for grease to come out of the tuner periodically. This usually happens to older radios. Please be aware that this is not hazardous to one’s health nor will it cause any damage to the radio.

Loose Connector port for Power Cord:

If your connection to your power cord has become loose, you can also purchase the 1500 MA power supply and use it in the 12VDC port.

Bluetooth Not Connecting:

If you are seeing your Model One BT appear on your Bluetooth list but are having trouble connecting, try forgetting your Model One BT in the Bluetooth menu of your device and then re-pairing them. If that does not resolve the issue, please contact Customer Support for further assistance*.

*Confirm that your smart device is running the latest firmware version

I am attempting to turning up the volume on my device and it is maxed. How can I make the audio louder as it seems low?

The audio’s volume through Bluetooth is controlled by the device output as well as the speaker’s volume output. We recommend placing your Bluetooth device at 80% output and adjusting the volume knob on the radio to reach your preferred overall volume.

Translation missing: en.layout.drawers.close

This website is using cookies

We use them to give you the best experience. If you continue using our website, we'll assume that you are happy to receive all cookies on this website.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


In Your Cart

Your cart is currently empty.

Continue shopping